Part Number Hot Search : 
2N3501UB 1N6616 BZX84C GL41G S20045 AM2953 2SC16 2N6101
Product Description
Full Text Search
 

To Download STTH6006W Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 STTH6006W
Turbo 2 ultrafast - high voltage rectifier
Table 1. Main product characteristics
IF(AV) VRRM Tj VF (typ) trr (max) 60 A 600 V 175 C 1.1 V 60 ns K DO-247 STTH6006W A
A K
Features and benefits

Ultrafast switching Low reverse current Low thermal resistance Reduces conduction and switching losses
Description
The STTH6006W uses ST Turbo 2 600 V technology. This device is specially suited for use in switching power supplies, and industrial applications. The VF / Trr trade-off has been specially established to increase the performance in welding applications. Table 3.
Symbol VRRM IF(RMS) IF(AV) IFSM Tstg Tj
1.
Table 2.
Order code
Marking STTH6006W
Part number STTH6006W
Absolute ratings (limiting values per diode at 25 C, unless otherwise specified)
Parameter Repetitive peak reverse voltage RMS forward current Average forward current, = 0.5 Tc = 95 C Value 600 90 60 400 -65 to + 175 175 Unit V A A A C C
Surge non repetitive forward current tp = 10 ms Sinusoidal Storage temperature range Maximum operating junction temperature(1)
to avoid thermal runaway for a diode on its own heatsink
dP tot 1 -------------- < ------------------------dT j R th ( j - a )
July 2007
Rev 2
1/7
www.st.com
Characteristics
STTH6006W
1
Characteristics
Table 4. Thermal parameters
Symbol Rth(j-c) Parameter Junction to case Value 0.75 Unit C/W
Table 5.
Symbol IR(1) VF(2)
Static electrical characteristics
Parameter Reverse leakage current Test conditions Tj = 25 C Tj = 125 C Forward voltage drop Tj = 25 C Tj = 150 C VR = VRRM Min. Typ Max. 50 A 160 1600 1.85 IF = 60 A V 1.10 1.40 Unit
1. Pulse test: tp = 5 ms, < 2 % 2. Pulse test: tp = 380 s, < 2 %
To evaluate the conduction losses use the following equation: P = 1.07 x IF(AV) + 0.006 IF2(RMS) Table 6.
Symbol
Dynamic characteristics
Parameter Test conditions IF = 0.5 A, Irr = 0.25 A, IR = 1 A, Tj = 25 C IF = 1 A, dIF/dt = -50 A/s, VR = 30 V, Tj = 25 C Reverse recovery current Forward recovery time Forward recovery voltage IF = 60 A, dIF/dt = -100 A/s, VR = 400 V, Tj = 150 C IF = 60 A dIF/dt = 200 A/s VFR = 1.1 x VFmax, Tj = 25 C dIF/dt = 200 A/s IF = 60 A VFR = 1.1 x VFmax, Tj = 25 C 3 60 10.5 Min. Typ Max. 60 ns 85 14 500 ns V Unit
trr
Reverse recovery time
IRM tfr VFP
2/7
STTH6006W
Characteristics
Figure 1.
Conduction losses versus average current
Figure 2.
Forward voltage drop versus forward current
110 100 90 80 70 60 50 40 30 20 10 0
PF(AV)(W)
= 0.1 = 0.05 =1 = 0.2 = 0.5
200 180 160 140 120 100 80 60
IFM(A)
Tj=150C (maximum values)
Tj=150C (typical values)
T
40
Tj=25C (maximum values)
IF(AV)(A)
0 5 10 15 20 25 30 35 40 45 50
=tp/T
55 60
20
tp
0 65 70 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
VFM(V)
1.8 2.0 2.2 2.4
Figure 3.
Relative variation of thermal Figure 4. impedance junction to case versus pulse duration
50 45 40 35 30 25 20 15 10
Peak reverse recovery current versus dIF/dt (typical values)
1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0
Zth(j-c)/Rth(j-c)
Single pulse
IRM(A)
VR=400V Tj=125C IF=2 x IF(AV) IF=IF(AV) IF=0.5 x IF(AV)
IF=0.25 x IF(AV)
tp(s)
1.E-02 1.E-01 1.E+00
5 0 0 50 100 150
dIF/dt(A/s)
200 250 300 350 400 450 500
1.E-03
Figure 5.
Reverse recovery time versus dIF/dt (typical values)
VR=400V Tj=125C
Figure 6.
Reverse recovery charges versus dIF/dt (typical values)
VR=400V Tj=125C IF=2 x IF(AV)
500 450 400 350 300 250 200 150 100 50 0
trr(ns)
3000 2750 2500 2250
IF=2 x IF(AV)
Qrr(nC)
2000 1750
IF=IF(AV) IF=0.5 x IF(AV) IF=IF(AV)
1500 1250 1000 750 500
IF=0.5 x IF(AV)
dIF/dt(A/s)
0 50 100 150 200 250 300 350 400 450 500
250 0 0 50 100 150
dIF/dt(A/s)
200 250 300 350 400 450 500
3/7
Characteristics
STTH6006W
Figure 7.
Softness factor versus dIF/dt (typical values)
Figure 8.
Relative variations of dynamic parameters versus junction temperature
0.6
S factor
IF 2 x IF(AV) VR = 400 V Tj = 125 C
1.25
0.5
1.00
tRR
0.4
0.75
0.3
IRM
0.50
0.2
QRR
0.25
0.1
Tj(C) dIF/dt(A/s)
0.00 25
350 400 450 500
IF=IF(AV) VR=400V Reference: Tj=125C
0.0 0 50 100 150 200 250 300
50
75
100
125
Figure 9.
VFP(V)
IF=IF(AV) Tj=125C
Transient peak forward voltage versus dIF/dt (typical values)
Figure 10. Forward recovery time versus dIF/dt (typical values)
1000 900 800 700 600 500 400 300 200
8.0 7.5 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0
tfr(ns)
IF=IF(AV) VFR=1.1 x VF max. Tj=125C
dIF/dt(A/s)
0 100 200 300 400 500
100 0 0 100
dIF/dt(A/s)
200 300 400 500
Figure 11. Junction capacitance versus reverse voltage applied (typical values)
1000
C(pF)
F=1MHz VOSC=30mVRMS Tj=25C
100
VR(V)
10 1 10 100 1000
4/7
STTH6006W
Package mechanical data
2
Package mechanical data

Epoxy meets UL94, V0 Cooling method: by conduction (C) Recommended torque value: 0.80 Nm Maximum torque value: 1.0 Nm DO-247 dimensions
Dimensions Ref. Millimeters Min. A
V
Table 7.
Inches Min. Typ. Max. 0.203 0.102 0.031 0.055 0.078
Typ.
Max.
4.85 2.20 0.40 1.00 2.00 2.00 10.90 15.45 19.85 3.70 18.50 14.20 34.60 5.50 2.00 5 60 3.55
5.15 0.191 2.60 0.086 0.80 0.015 1.40 0.039
D E
Dia
V
F F2
H A
F3 G
2.40 0.078 0.429 15.75 0.608 20.15 0.781 4.30 0.145 0.728 14.80 0.559 1.362 0.216 3.00 0.078 5 60 3.65 0.139
0.094
L5
H
L L2 L4 F2 L3 F3 V2 F G M E L1 D
0.620 0.793 0.169
L L1 L2 L3 L4 L5 M V V2 Dia.
0.582
0.118
0.143
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com.
5/7
Ordering information
STTH6006W
3
Ordering information
Table 8. Ordering information
Marking STTH6006W Package DO-247 Weight 4.40 g Base qty 30 Delivery mode Tube
Part Number STTH6006W
4
Revision history
Table 9.
Date 18-May-2006 11-Jul-2007
Revision history
Revision 1 2 First issue. Reformatted to current standards. Updated Table 7. Changes
6/7
STTH6006W
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
7/7


▲Up To Search▲   

 
Price & Availability of STTH6006W

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X